for SAMSUNG Galaxy S9 Plus Edge G965 Screen Display With Adhesive

1.LCD Display Screen Digitizer Assembly For Samsung Galaxy S9 Plus Edge G965 ,If your For Samsung Galaxy S9 Plus touch screen is not responding to any input Or the Lcd Display is broken, then this replacement part is what you need .
2.Replacing your old, broken, cracked, damaged and unusable LCD screen assembly with a new one,Each item has been checked and in good condition before shipping.

3.This is not an easy job for someone who has no technical skills with Disassembling or Assembling Cellphones/mobile phones, so only purchase this item if you know how to install it.

4.Highly recommend professional installation. We will not be held responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Repair Tips:
Take care when tearing down your For Samsung Galaxy S9 Plus Edge G965 Amoled LCD. (The LCD and Digitizer flex cable are connected on the motherboard, don't pull out with too much power, you should do it slowly to avoid damage the motherboard plug or connector)

After installation, if the screen has vertical bar, please re-connect the Lcd and Digitizer flex cable, the vertical bar is caused by improper connection.

Please make sure the screws and adhensive are correctly put into each hole.For Samsung Galaxy S9 edge Lcd is thin and fragile, when installed frame, Need gently the frame on the edge lcd, Can't push hard on it .

There is a small "PL" tag on the back of the Samsung S9 LCD Display, please don't take it off, if it was taken off or badly damaged, we won't admit the products , and there is no warranty anymore.

What you get:
Package Content New For Samsung Galaxy S9 Plus Edge G965 LCD Display and Digitizer Screen Assembly